Hi
Using Ubuntu Linux, I use dfu-util -a 0 -D *
* go to my Downloads directory and copy the file name
This then puts the filename and path into the terminal command
Then just press Enter - and voila!
Regards
Colin
On Thu, 23 Feb 2023 at 07:21, Lawrance A. Schneider <llaassllaaass@...>
wrote:
In the Mac Terminal, I use use:
dfu-util -a 0 -s 0x08000000:leave -D tinySA.bin
to update my tinySA. I like using the terminal as opposed to yet another
GUI.
I would like to use the same for updating my new nanoVNA H4 . Presently,
it is:
1.1.01 with Hardware version 4.3_MS .
Using the tinySA, I delete the version number. i.e. tinySA............bin
is reduced to tinySA.bin . Works great! After I bought a tinySA Ultra,
the above worked fine so long as I:
a) used the correct firmware (tinySA and tinySA Ultra are different)
b) deleted the firmware version numbers from tinySA...............bin to
tinySA.bin
I tried;
dfu-util -a 0 -s 0x08000000:leave -D nanoVNA \ H4.dfu
and it did not work! I think I need:
NanoVNA H4 v1.2.19.bin to do as outlined above. Is there a way of
converting:
NanoVNA H4 v1.2.19.dfu to NanoVNA H4 v1.2.19.bin ?? If not, where do I
get NanoVNA H4 v1.2.19..bin ?
Thank you for any help, larry
