开云体育

This one was from who" Stuart K6YAZ

Just received my 2nd nanoVNA. This is the black case, no Gecko white which works current to date quite well with 2 track display. This black case arrived ON TIME and well packed. Apparently held it's

I just checked and nanoVNAsharp.zip is there. So this should work fine. Unzip and install; in my case was done under Windows 10. There is a dll file there and a Smith Chart back drop graph is in

Did you try this: https://drive.google.com/drive/folders/1-JViWLBOIzaHTdwdONX2RP8S4EgWxoND Supposed to have it all. I obtained mine via a .RAR file or a zip file which I could send as well if the

I just tried to get the software but it was forbidden my access. Can you please send me the link to get the software to run my nanoVNA? Thanks for helping Greg Sent from

What problem are you having? Alan ________________________________ Sent: Monday, July 8, 2019 3:03 PM To: [email protected] Subject: Re: [nanovna-users] Your NanoVNA version Can some one

Can some one please help me to get the computer software to run my NanoVNA ?

Dear Hugen, I own the two versions ( your designed version, black, with battery and shielded entries, and the "clone" white version ). I noticed that the mixers used in white version are SA602A

On Mon, Jul 8, 2019 at 10:44 AM, amirb wrote: > > Hugen, > > Are there any other differences with your design, other than the RF shields, > that I should be looking out for? > He hasn't shipped it

Hugen, Are there any other differences with your design, other than the RF shields, that I should be looking out for? He hasn't shipped it yet. He talks about the shields in the description, so as

Okay, but isn't that what GitHub is for? These days with all the fancy dissassemblers available, it's very easy to reverse engineer most code anyways and it is an unfortunate fact that everything of

I'm sorry Larry. Under the GNU protocol, I should open my code, but there are clone makers who use my firmware and claim to have modified the code themselves, and I delayed the plan to open the code

I'm not sure, either, because the clone maker will steal my test pictures directly. Checking the internal construction is an effective method.

It looks good.

On Sat, Jul 6, 2019 at 09:15 PM, larry@... wrote: > > What do you mean by reset cal data. > > Do you mean turn cal correction off before trying to collect new cal data. > > What key

That must be a later version design

I have a black nanoVNA and it does have a USB-C connector.

It is a micro USB connector. I am not sure if people have confused micro USB with USB-C on this list, or if there really are some nanoVNA which have USB-C connectors. My model is the white gecko,

Which type of USB connector mtes to the usb port of the nano vna (White Version)? i tried the USB C connector, but it does not match. Furterhmore: how is the internal battery charged: USB cable

On Sat, Jul 6, 2019 at 03:07 PM, alan victor wrote: > > Here is a 1 dB SMA pad terminated in a short. The cal was done at the end of a > SMA connector saver. The 1 dB pad connected to the saver and