|
I just checked and nanoVNAsharp.zip is there. So this should work fine. Unzip and install; in my case was done under Windows 10. There is a dll file there and a Smith Chart back drop graph is in place. That way no generation of the chart is required via SW.
________________________________ From: [email protected] <[email protected]> on behalf of alan victor <avictor73@...> Sent: Monday, July 8, 2019 4:48 PM To: [email protected] Subject: Re: [nanovna-users] Your NanoVNA version Did you try this: Supposed to have it all. I obtained mine via a .RAR file or a zip file which I could send as well if the above does not do it. ________________________________ From: [email protected] <[email protected]> on behalf of Greg Ashley <Gregory@...> Sent: Monday, July 8, 2019 3:31 PM To: [email protected] Subject: Re: [nanovna-users] Your NanoVNA version I just tried to get the software but it was forbidden my access. Can you please send me the link to get the software to run my nanoVNA? Thanks for helping Greg Sent from Mail<> for Windows 10 ________________________________ From: [email protected] <[email protected]> on behalf of alan victor via Groups.Io <avictor73@...> Sent: Monday, July 8, 2019 4:29:15 PM To: [email protected] Subject: Re: [nanovna-users] Your NanoVNA version What problem are you having? Alan ________________________________ From: [email protected] <[email protected]> on behalf of Greg Ashley <Gregory@...> Sent: Monday, July 8, 2019 3:03 PM To: [email protected] Subject: Re: [nanovna-users] Your NanoVNA version Can some one please help me to get the computer software to run my NanoVNA ? -----Original Message----- From: [email protected] <[email protected]> On Behalf Of f4htq via Groups.Io Sent: 08 July 2019 16:02 To: [email protected] Subject: Re: [nanovna-users] Your NanoVNA version Dear Hugen, I own the two versions ( your designed version, black, with battery and shielded entries, and the "clone" white version ). I noticed that the mixers used in white version are SA602A instead of SA612A. Do you think that will be a issue ? have you put SA612A mixers on your model ? I have a huge performance differencies betwen the black and the white version. at 900MHz little more than 50 dB of dynamic range subsist with the black version but no more than 30dB with the white version. Do you think that can be only explained by the missing shielding ? (However when i made some test on HF and VHF frequencies, the results seems quite identicals). regards, David, F4HTQ. |
