Herb,
I don't think that is correct (at least in the firmware version I am using, 0.4.0-3-ge04d3af). In the Polar S11 mode, the marker readout is the Real and Imaginary components of the reflected wave. If both are zero, the Z is 50 ohms + j 0 ohms, not 0 ohms + j 0 ohms.
--John Gord
toggle quoted message
Show quoted text
On Mon, Jan 20, 2020 at 06:00 PM, hwalker wrote:
Just set one of the CH0 traces to "polar" format and you get R+/-JX display.
The NanoVNA was designed for hobbyist use and the majority prefer the pF and
nH format so they don't have to do the additional component conversion math.
But if you prefer polar display it is there for the choosing. You can make
your choice default by saving to memory location 0.
- Herb
