On Fri, Jan 17, 2020 at 11:26 AM, Ray, W4BYG wrote:
NanaoSaver 0.2.2 loads up OK and the VNA boots fine but can't seem to get it to connect.?
===========================================
Ray,
Getting NanoVNA-saver to work on some systems seems to be a topic begging for a FAQ section. The problem happens not only on Windows OS, but judging from the volume of messages the past few days, on the LINUX OS too.
Windows 10 should not require you to install any additional drivers and NanoVNA-saver should automatically detect your NanoVNA, if it is already powered-on when start the NanoVNA-saver executable. If you are running Windows 10 and your NanoVNA is not being detected then the first order of business should be to check your USB cable. If you are sure the cable is not a fault then report back and we can try to help you from there.
If you are running Windows 7 then installation can be more problematic. Of course you want to also verify your USB cable connection, but several users have also reported needing to upgrade to the latest service pack and install the correct 32-bit or 64-bit STM drivers.
- Herb
