Hi Rune,
I still find some strange things in the marker handling? :
1) I did a 2 port calibration? from 10kHz to? 1400MHz (and pressed "apply")
2) I filled all 9 marker-bars with different frequencies from 1MHz to 1400MHz
3) Then I did a sweep with CH0 connected to CH1 by a +/-30 cm long? RG316 cable, that was still connected to the VNA after the through calibration.
4) After this, the markers 1 up to included 5 on the data field were filled with data, the markers 6 up to included 9? were EMPTY. !
5) Marker 4 its color was grey so the tekst above the data field did not show up on the gray background.
6) I tried to change the color, but marker 4 does not accept the new color . (I tried several others and they did)
7) The markers 3 and 4 original frequencies that were set were overwritten both with 100.616536MHz (I had set marker 5 , to 100MHz)
I hope this is of help for this great program.
Kind regards
Jos
Op 13-1-2020 om 17:30 schreef Rune Broberg:
toggle quoted message
Show quoted text
Hi Leif,
they are in 0.2.2 - set up which marker data you want under "Display
settings".
