Thanks Larry, good info. Alan
________________________________
From:
[email protected] <
[email protected]> on behalf of Larry Rothman <ac293@...>
Sent: Saturday, June 29, 2019 12:40 PM
To:
[email protected]Subject: Re: [nanovna-users] Translated instructions
You can access additional commands by connecting the unit to your PC, opening a terminal on the VNA's serial port and type the help command at the prompt.
You will get a list of all the commands available through the VNA's console.
I used this to calibrate the touch surface using touchcal.
Unfortunately, it doesn't store the touch calibration update.
