Re: DL9CAT version 0.4.0-2? I have encountered the following problem. CW FREQ once started can not be stopped,you have to shut down the device.
toggle quoted message
Show quoted text
On Sunday, November 10, 2019, 08:33:10 AM GMT+2, KV5R <kv5r@...> wrote:
Greetings DL9CAT,
I have loaded reald 0.4.0-2 and tested; the C0/C1 reverse text colors for selected trace works fine; I can now see which trace is selected before changing trace parameters.
I will also note that your vbat offset works well for the 1N4148 diode I installed; it indicates full for most of the cycle, then 2/3, 1/3, and when it turns red there are only a few minutes before it shuts down. So it does what it should! :)
Also, noted that the "Ch-0 Info" screen works even if all traces are off (reduces clutter) and freq is CW, so it works like a text-based antenna analyzer and is very easy to read, with those 5mm high digits! And with only SWR trace on, and a small span, the jog switch will move the frequency in small steps, and Marker > Search > Minimum will find lowest SWR point in the swept span.
I'm sure these added features will make the nano more attractive to hams with primary interest being antenna analyzer.
Thanks again,
73, --KV5R
On Sat, Nov? 9, 2019 at 10:03 AM, DL9CAT wrote:
Should be fixed now. Please test.
73 DE DL9CAT
