On Sun, Nov 3, 2019 at 04:07 PM, Clint Turner wrote:
If I could, I would put more heat-shrinkable tubing on them, but this is
difficult with the already-attached connectors.
I have used two alternatives: wrappable heat shrink and Silicone Rubber Self Fusing Tape. The tape come in different thicknesses and widths. A life-saver during some high-altitude balloon missions, because it goes on by itself in the field.
Not as much luck with the wrappable stuff, but if you have some shrink tubing with a high shrink ratio, you can pre-wrap with other material, the slide a larger sleeve over. I have done this, and admit that it can look clunky, but function wins over form for me here.
--
On the banks of the Piscataqua
Rich NE1EE
Rich NE1EE