See attached screen shot. I purchased my white gecko from 2012moon816. It
included the battery.
toggle quoted message
Show quoted text
On Mon, Jun 24, 2019 at 10:30 AM Larry Rothman <ac293@...> wrote:
A quick comment on the flux residue - it doesn't have to be cleaned if
it's the water-soluble type. It looks bad but it's harmless.
Brass shim should work for the shields, but make sure it's not too thin or
you'll see something akin to microphonics if the flat surface is able to
vibrate.
When I worked at Motorola, we had to mould stiff ribs along the surface of
the synth VCO covers to prevent issues caused by even the smallest
vibrations.
If you have a local junk/surplus store see if they have any
cellphones/pagers/radios that you can pull some shields off of.
Just heat the board up with a heat gun and the shields fall off.
As for the battery, I think the ones that came with one, have it
sandwiched between the back cover and the PCB. Maybe some can confirm?
