When you click the DFU menu button, you get the next menu with 2 items: Reset and Enter DFU and Cancel.?
The full word:. Calibration is a switch that can be inverted text to show calibration is being applied, or normal text to show calibration is not being applied.? How often do you turn it on or off???
On Sun, 6 Oct 2019 at 10:12 AM, Oristo<ormpoa@...> wrote: Hi Larry -
I think on the CAL line, reset should be the very first item opposite CAL and
everything else is below. Why? You need to do a reset before you do the rest
of the cal steps.
I totally agree and can rearrange that on the tree..
Leave 'calibration' at the bottom as you rarely use it.
Actually, I calibrate pretty often, nearly every time before
measurement, to consider everything except DUT as "ideal".
Also, as soon as you press Done, you get the save menus, no?
Yes, but my CSS is not good enough for two branches to SAVE
.. but I can duplicate SAVEs!
There is one more entry after the DFU button
I see only BACK and do not bother mapping those.
Thanks for the feedback!
