Possibly the attachment will help.
Dave - W?LEV
On Tue, Apr 1, 2025 at 3:36?PM W0LEV via groups.io <davearea51a=
[email protected]> wrote:
Beware of most YouToob presentations. Those by the "big boys" which offer
their instruments for lots of $$$$ are good and solid. Many of those by
amateurs or "self proclaimed experts" are flawed. Take anything on YouToob
with a huge grain of salt!!
Dave - W?LEV
On Tue, Apr 1, 2025 at 1:59?PM Zack Widup via groups.io <w9sz.zack=
[email protected]> wrote:
If the video on Youtube notes that the impedance should be zero, it is
incorrect. The THRU impedance should be 50 ohms. I just checked on three
NanoVNA's, and they all measure 50 ohms.
Zack W9SZ
On Tue, Apr 1, 2025 at 8:48?AM Paolo via groups.io <paolo.vecchi=
[email protected]> wrote:
Hi, I have seen a video on Youtube…
NANOVNA analizzatore di antenne: come usarlo (
)
youtu.be ( )
( )
Inviato da iPhone
Il giorno 1 apr 2025, alle ore 15:39, Dragan Milivojevic via
groups.io
<d.milivojevic@...> ha scritto:
? Port 2 is 50Ω as it should be, why do you imagine that it would be
0?
On Tue, 1 Apr 2025 at 14:14, paolo.vecchi via groups.io
<paolo.vecchi=
[email protected]> wrote:
I buyed a nanovna H 3.6. When I try to calibrate it, after the full
procedure, if I set a Smith diagram and I connect THRU the two ports
using
the supplied cable the value is 50 ohm instead of 0. I resetted and
repeated the calibration a lot of time but with the same result. Can
you
help me? Thanks
<
Virus-free.www.avg.com
<
<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
--
*Dave - W?LEV*
--
Dave - W?LEV
--
*Dave - W?LEV*
--
Dave - W?LEV
