Port 2 is 50Ω as it should be, why do you imagine that it would be 0?
On Tue, 1 Apr 2025 at 14:14, paolo.vecchi via groups.io <paolo.vecchi=
[email protected]> wrote:
I buyed a nanovna H 3.6. When I try to calibrate it, after the full
procedure, if I set a Smith diagram and I connect THRU the two ports using
the supplied cable the value is 50 ohm instead of 0. I resetted and
repeated the calibration a lot of time but with the same result. Can you
help me? Thanks
