The version is typically part of the model number on the sticker on the case. The PCB is the same for the MS and SI - only the chip vendor changes.
toggle quoted message
Show quoted text
On March 2, 2025 5:27:50 PM EST, "VA4BG via groups.io" <bobgau@...> wrote:
Thanks for the reply, nowhere on the board do i see any reference to ms,si or zk, where should i be looking? Also have installed dfuse demo but running cannot get the correct driver. Looked in the files section and on stm site but cannot find a driver for win 11.
On Mar 2, 2025, at 3:06?PM, juancb via groups.io <juancb@...> wrote:
?What firmware are you trying to use?
If you are using Hugen79's firmware then pay close attention to the image you downloaded. I ran into a black screen after upgrade as well caused by me mistakingly flashing my NanoVNA-H4 with the -H firmware. The H and H4 are different hardware and their firmware is incompatible. Furthermore check the back of your unit and make sure you've selected the right hardware variant of the H (MS, SI, ZK) not doing so will also result in a failure to boot.
Luckily recovering is easy, just boot into DFU mode and flash the right firmware for your H/H4. I hope that helps.
--
Sent from my Android device with K-9 Mail. Please excuse my brevity.
