开云体育

On 19 Nov 2024, at 18:23, Roger Need via groups.io <sailtamarack@...> wrote:

On Tue, Nov 19, 2024 at 11:07 AM, Leif M wrote:

Whatever inductance you want, you should measure it like inductors are
measured. On S11 port, one end to SMA center pin and the other to SMA ground.
If the reactance is much larger than 50 ohms, you should to use S11 and S22.

The reactance can be much less than 50 ohms and much greater than 50 ohms and you will still get good results. Here is a measurement of an inductor that measured 9.8 uH at 100 kHz. on a DE-5000 LCR meter. This is an S11 shunt measurement of the inductor.

Roger








<groups.io.JPG>