Hi Jeff,
since 0.0.10 NanoVNA-Saver supports reading MA format as well, using
Hz/kHz/MHz/GHz. :-)
I'll look at DB format as well, which would be required for Elsie.
RFSim seems to use a very minimal header (# MHz MA), which isn't exactly
best practice, but I guess I could make the software put in default values
for those that are missing.
Thanks for the links! :-)
--
Rune
toggle quoted message
Show quoted text
On Mon, 30 Sep 2019 at 00:52, Jeff Anderson <jca1955@...> wrote:
On Sun, Sep 29, 2019 at 03:40 PM, Jeff Anderson wrote:
So, for me (and my Matlab-generated files), it would be great if you also
supported loading and storing files using MHZ in lieu of HZ..
NanoVNA-Saver can already read and save in RI format (I believe). If you
were
to add the reading of files in DB or MA formats, this would require
mathematical conversions. Not difficult, but more code.
Just in case my comment is misinterpreted -- I didn't mean to sound like
I was only pitching adding MHZ and nothing else. I'd recommend adding DB
and MA formats, as the math conversions should be straightforward.
- Jeff
