Thanks to all who replied to my Com Port problem! It is much easier to add info to the group en masse The following is happening in Device Mgr: when I turn the nanovna on or off, DM registers this hardware change I discovered 2 hidden ports Standard Ports 4 & 5 report: This device cannot start. (Code 10) The specified request is not a valid operation for the target device
Enhanced Ports 6 & 7 report:Currently, this hardware device is not connected to the computer. (Code 45) To fix this problem, reconnect this hardware device to the computer I have no clue how to "connect" these to the system [although, I tried updating the driver] When I turn-on the power supply, for my station, Ports 6 & 7 work properly. However, although Ports 3, 6 & 7 now appear in the drop list, in nano-app, when I click on either one, CONNECTed is displayed for a few seconds, then reverts to DISCONNECTed. Nano-saver still displays no ports and RESCAN does nothing. Can the order, in which I turn-on hardware & softwr, make a difference? Thanks to all, for previous, and upcoming, help. 73Phil, WF3W
