Hi all,
this might be helpful.
[image: image.png]
[image: image.png]
R should be ~ 1 - 2 kOhm, noniductive.
73
Predrag, 9A3QV
toggle quoted message
Show quoted text
On Mon, 8 Aug 2022 at 10:37, Arie Kleingeld PA3A <pa3a@...> wrote:
Thanks for this comment Gerard.
I upgraded to from DiSlord 1.1 to DiSlord 1.2.00 on an H4.3 and it seems
to work.
I tried 300 ohm as Zo and it moved the 50 ohm load to the place it
should be on a 300 ohm Smith Chart.
So far so good.
73
Arie PA3A
Op 8-8-2022 om 03:40 schreef John Gord via groups.io:
Gerard,
It looks like the latest H and H4 firmware from DiSlord also has the
Port-Z rescaling.
--John Gord
On Sun, Aug 7, 2022 at 11:34 AM, John Gord wrote: