This 500 Hz bandwidth filter is problematic. Upon further measurements with another instrument there are issues.
I will find another baseline network and report findings again.
Alan
________________________________
From:
[email protected] <
[email protected]> on behalf of dk1vi <dk1vi@...>
Sent: Thursday, July 11, 2019 4:09 PM
To:
[email protected]Subject: Re: [nanovna-users] Narrow band filters and LO phase noise/jitter?
In crystal factories crystals are measured in a 50Ohm system with a pi-network on both sides as per enclosed picture.
Don't know if the resistance values are readable in the compressed picture so here the are:
Input R1=159 ohms to ground, R2=66,2 ohms in series and R3=14,2 ohms to ground. On the outputside the network is mirrored.
Please do not ask me where this strange resistor values come from.
