I can pull mine apart and see if I can come up with something. I agree, the "external" parts need dome protection
toggle quoted message
Show quoted text
On 7/11/2019 11:39 AM, alan victor wrote:
There is some value added packaging if it can be done at a reasonable cost. The slide switch and the rotary wheel switch are subject to failure or breakage. Especially when used in the field. The LCD display in the field is nearly impossible to read unless you shield it from the sun. I used it to measure an antenna outdoors and had to either put it in a black box or wait till I had some cloud cover. Some sort or reasonable shroud for protection and enhanced viewing for field use would be great. The USB port seems ok. A port for firmware updates would be nice. Comments? Alan
________________________________
From: [email protected] <[email protected]> on behalf of Larry Rothman <ac293@...>
Sent: Thursday, July 11, 2019 2:50 PM
To: [email protected]
Subject: Re: [nanovna-users] Extended back cover
Folks,
Instead of reinventing the wheel to design a case, have a look at the 1553BBK series Hammond housing.
It's approx $12 CAD.
It looks like a small amount of internal trimming might be needed but it looks perfect.
Regards,
Larry
