Hi Nick,
please try putting the full path to the file in the field, not just the
file name. It may be a matter of which folder the software sees as its
working folder (generally controlled by your OS).
I liked the firmware message as well, but I haven't found a nice place to
put it, and several people were having problems running out of screen real
estate - so for now, it's no longer shown. I'd love to have it back, though.
--
Rune / 5Q5R
toggle quoted message
Show quoted text
On Thu, 19 Sep 2019 at 21:03, Nick <g3vnc@...> wrote:
Hi Rune
thank you so much for this application which I have been using to good
effect this past week with the nanoVNA.
I think there may be a problem with saving and loading calibrations.
Yesterday I did a calibration which I called full_sweep. The full_sweep
file was saved to the nanovna-saver directory, and I could shutdown
nanovna-saver, restart it, and load the calibration.
Today it will not load. I get this
2019-09-19 19:49:53,703 - NanoVNASaver.Calibration - ERROR - Failed
loading calibration data: [Errno 2] No such file or directory: 'full_sweep'
Traceback (most recent call last):
File "/home/nick/nanovna-saver/NanoVNASaver/Calibration.py", line
430, in loadCalibration
file = open(filename, "r")
FileNotFoundError: [Errno 2] No such file or directory: 'full_sweep'
The file is still present. Is this a problem with directory paths?
73
Nick
G3VNC
PS: I used to like the build date message from the firmware when you
first connected to the device!
On 18/09/2019 21:36, Rune Broberg wrote:
I just released 0.0.10:
