In starting the cal process, it is assumed you have previously set the
desired frequency range.
Dave - W?LEV
On Thu, Jul 15, 2021 at 11:37 AM Richard Clemens <rich.clemens@...>
wrote:
On Thu, Jul 15, 2021 at 09:27 AM, Jim Lux wrote:
Very helpful -- however when I do a calibration with nanovna-saver's tool
it does not ask for a frequency range when starting the process -
confusion...
2) If the frequency span of the measurements is different than the
frequency
span of the calibration. The NanoVNA does some interpolation, but if
you did
a cal from 0-50 MHz and now you're measuring a DUT from 200-300 MHz, the
measurement might be iffy. Likewise if you did a cal from 0-900 MHz, and
the
measurement is from 20-30 MHz.
--
*Dave - W?LEV*
*Just Let Darwin Work*
