Re: New user
|
Hi all,
toggle quoted message
Show quoted text
OK, I have fixed the issue and got it working. It appears a restart of the PC was needed, and although my nanoVNA showed up in the port area, I had to connect to it regardless. I had tried that before, but it failed, so I gave up and performed the restart and all is now well. Thanks for pointers and suggestions! 73 de Phil GU0SUP -----Original Message-----
From: "Charlie N2MHS via groups.io" <ucfargis1@...> Sent: Friday, 19 March, 2021 12:52 To: "[email protected]" <[email protected]> Subject: Re: [nanovna-users] New user Did you use the calibration assistant and follow the prompts? On Friday, March 19, 2021, 5:47:42 AM EDT, Phil Cooper via groups.io <pcooper@...> wrote: Hi all, My name is Phil, and call is GU0SUP. I am a new user of 2.8" nanoVNA, and I can calibrate it fine using the screen. However, when I start nanoVNA-Saver,set the start & stop frequency limits, I am able to click on the various calibrate options, and it says 101 points, but when I click on apply, it tells me "Two of short, open and load returned the same values at frequency 3600000Hz". This is despite the fact that I have set the frequency range to the 2m band. Where have I gone wrong? I can't seem to find any instructions, although I assume they must be somewhere... Any help or pointers would be much appreciated. Best 73 Phil GU0SUP |
Phil Cooper