Hello all,
I purchased a SAA-V2 from Amazon's seller Seesii and BOTH the SMA's are bad or wrong size or something? I can get about 3/4 of a turn before it stops acting like wrong thread count so I decided to re thread it with a proper die. The die went on and off too easy as if the SMA's diameter is a little smaller than it should be. When I try connecting anything it just doesn't "feel" right, it tries to screw on at a slight angle but if I align it perfectly it will only get almost 3/4 turn. Just wondering if anyone else has had this problem? Another thing I found was it claimed 6 to 8 hour run time with the internal battery which I found wasn't even close. I cycled the battery on 2 identical units 4 times and only got about 3.25 hours of run time. The seller quickly changed that to 3hrs on his listing after I wrote him about my findings. He still has another listing for the same SAA-V2 with the original claim of over 6hrs run time
