Gyula,
Yes, the 40pin fpc cable and the single strip of pins do the same thing I was told.
The single strip is easier to "bread board".? I will use the fpc connector eventually when a board is made...
73
Glen k4KV
toggle quoted message
Show quoted text
On 8/13/2020 13:19, Gyula Molnar wrote:
Hi Glen,
i don't understand exactly what you need.
It is possible for the nanovna-H4 to have a 40 pins LCD display which is 0.5 mm pitch or for SAA2 the SPI controlled 14 pines display it is 2.54mm pitches. I got both. The former was backed up due to damage to the center of the screen, I also tested this (see my web page). link:
While the 14-pin SPI display is sourced from:
I did not test this in the absence of a device. Both arrived in careful packaging, double protected from damage. That's how I can recommend.
73, Gyula HA3HZ
