Hi there,
Do you think a specific groups.io group would help?
I have created one already, as I am waiting for my unit, but I am not sure
if its impolite to mention it here.
*73 de Lu¨ªs, CT2FZI*
<>
toggle quoted message
Show quoted text
On Sun, 29 Mar 2020 at 17:42, hwalker <herbwalker2476@...> wrote:
On Sat, Mar 28, 2020 at 09:53 PM, Gabriel Tenma White wrote:
I can confirm that currently the only way to exit USB mode is to toggle
the power switch. I'll look into adding a register to allow changing modes.
The USB interface always outputs raw, uncalibrated values, as is in the
user manual. The reason is the assumption that the PC software always has
superior calibration routines (e.g. supporting arbitrary cal kit
parameters) and it is far less error prone if you can't be confused whether
you are readin calibrated or uncalibrate values.
=============================================================
Gabriel,
Thanks for your response. I understand blanking the display while
NanoVNA-QT or similar programs are running to increase the speed of data
transfers. Plenty of commercial applications do the same thing. For small
scripts, where you just want to work with the trace data currently on the
display, it would really help if you could add a firmware command to
un-blank the display, and also a firmware command to transfer corrected
CH0 and CH1 data.
Do you know it the client, HCXQS group, plans on a support forum for
the S-A-A-2?
Regards,
- Herb
CT2FZI