On Fri, Mar 13, 2020 at 02:00 PM, D R wrote:
What's the matter, Roger? Still don't know which end of a screwdriver to
hold? The required "fix" is well off the lower end of the scale for the
degree of difficulty involved, but all you can do is whinge because a little
too much tightness was applied to the case screws. If the solution is too
difficult for you to carry out, then send your H4 to me and I'll do it for you
FOC.
You expect to get a free replacement case for your "defective" H4? You do
realise that that would involve your having to completely remove the case
screws, thereby going well past the requirements for the simple fix? Are you
sure you're sufficiently technically qualified to carry out such an operation?
Read again what Herb posted and absorb the message!
Regards,
Dave
DR - Dave,
Herb Walker, David Eckhardt, Jim Allyn and nanovnauser disagreed with me and expressed their comments in a constructive and civil manner. I can see their point of view.
You on the other hand found it necessary to make this personal for some reason, question my technical skills and hurl insults. I guess that is just your way of communicating.
This is usually a friendly group. To keep it that way I will stop posting on this topic. Roger Need
Roger Need