开云体育

Hi hwalker
That makes sense. Thank you
Kind regards
Kurt

-----Oprindelig meddelelse-----
Fra: [email protected] <[email protected]> P? vegne af hwalker
Sendt: 26. februar 2020 05:52
Til: [email protected]
Emne: Re: [nanovna-users] NanoVNA-Saver and the new _H4 firmware

Kurt Paulson wrote:
"New funny behavior with NanoVNA-saver as while it sweep the NanoVNA display is blanked. By continuous sweep display black (backlight off) and only visibly by ambient light but not updated."

================================================================================

I reported the issue to hugen and he responded that display dimming, when executing the scan command, is intentional to lower the demand on the power regulation.

"Yes, the display will be paused when using the scan command. At this time [while the scanning occurs -hwalker], it does not make sense to check the screen display trace. So I hope to reduce the screen brightness and save current consumption.
hugen"

- hwalker