开云体育

Hi, if no ATU is connected to HL2 and tuner is disabled (Hardware -> Antenna tuner = None) the ATU listbox on the main panel shows "ATU". If the listbox is clicked the text changes to "No ATU". I

Thanks Mike, I got my board back from JLCPCB and did some testing. It works okay over USB, but all the 1 uV birdies go away when I disconnect it from USB, so I was motivated to send the ADC data over

Hello Group, I just got back from a ski trip. I will try to catch up as soon as possible. Jim N2ADR

Try suppressing the flush. You can use an IOBytes buffer and then write the buffer out to file.? That's probably the best/fastest solution.

Hi Jim, My simple test to see how Python keeps up doesn't seem encouraging. I just did something simple like this: import os import serial port = "/dev/ttyACM0" baudRate = 460800 try: ser =

Hi Jim, I was looking at version 4.2.28 since I had the source handy, and was looking at sdriq.cpp as you recommended. I thought before I got to hacking around to try and get something going, I should

I've finally figured out how to do this: The variable can be accessed as "self.application.lastBand" from inside the function "UpdateText(self)"

The problem was solved as follows. #wFrame, h = frame.GetClientSize().Get()?# client window width wFrame = conf.window_width - 15

Hi group, I am trying to extend the following widget: https://github.com/haklein/hrctl/blob/main/hermes_widgets.py What I am trying to achieve is to automatically change the selected band on the

The value of?wFrame in the second line is incorrect at first, and after the second reboot it becomes correct.

This is very interesting information. I feel that it belongs in a document for people wanting to add support for their SDR to Hamlib. I have been reading the README.* files in the Hamlib repo. May I

Which compiler? With MSVC I assume since it does not have 'sys/time.h'. Your student need to use MinGW. But I've no experience with "pip install" and MinGW. Untested: "python setup.py build -c

Does anyone have any ideas on how to fix this problem? This is from ac2yd/remote.c(12). This is with Python 3.12.1. One of my students is having this issue. Rob KL7NA -- Rob Frohne, PhD PE School of

The reason rigctld emulation is a bad idea is that it changes over time.? And the client may want vfo mode or not so most every command has to be checked for VFO. A rig definition never changes --

In /g/n2adr-sdr/message/3043 we get a hint. You probably should read the whole thread when you get a chance. Personally I think emulating rigctld was a good idea, and I don't know why

What is the Rflna slider, what is its purpose? What is the screen got when hitting the Bscope button? How can I show the "slider 0 to 100% to change the transmit power", which is indicated in the HL2

I'm using Quisk v.4.2.29 with my Hermes Lite 2. After one the last upgrades a "FDV button" appeared but it is in White color and is inoperative. I have already FreeDV v.1.9.8 installed on my computer.

I think that here if conf.window_width > 0: wFrame, h = frame.GetClientSize().Get() # client window width graph = GraphScreen(frame, self.width//2, self.width//2, None) # make a GraphScreen to

This is..

If you switch from -1 to any value (or from value to -1), then it's fine. But if you switch between different values, then there is a problem. For example, between 1366 and 1920 (forward and