开云体育

I will put this into the next release. Jim N2ADR

Thanks JIm, I assumed RX_band was to be set = TX_band by the SDR app in transverter situations. I think that will eventually happen but not there yet. For now I simply set RX_band = TX_band just

Please look at https://james.ahlstrom.name/transceiver/index.html for the design files for the HiQSDR. Jim N2ADR

Hello Mike, Please see the answer on the HL2 group. The short answer is to modify your main.c to remove the HF specific code. Jim N2ADR

I connect my HL2 to and HF antenna with PA enabled on the ANT jack and VHF transverter(s) using split IF at 28Mhz at about 0dBm using the new IOBoard Aux Rx and RF1 for the output. The PA needs to be

I am using this version on a HL2 + IOBoard with a multiband transverter and it appears the RX frequency is not sent out in Quisk 4.2.23. When I went to TX then I got a valid band code and my Xvtr

Maybe the 'WayBackMachine' aka the internet archive can help? https://web.archive.org/web/20190907134854/http://hiqsdr.com/index.php?title=Main_Page Nigel G4ZAL

can you change the "--rig-name quisk" to something like "--rig-name radioa" and "--rig-name radiob" for different Linux (ubuntu) users ? I need this for my antenna SNR comparision setup Regards Joakim

Hello Is it possible to change this. in my Ubuntu the field is grayed and i can change the rigname so that wsjtx cant run a 2'nd instance (with another rig name) I have searched the configuration

I could forward my files, as downloaded during construction. 73 Bob g3udi

Hello Chuck, I am in the same situation as you. I dont have the paper for the HIQSDR. Can you kindly provide me with a link. Thanks 73, Rune l?r. 21. okt. 2023 kl. 02:17 skrev wizard cybinlabs.com <

Sorry Found it !!

Ordinarily, I would go to hiqsdr.org but that site doesn't seem active. We'll my old system crashed and everything related to my HiQSDR was lost. Can anyone point be to an archive that holds all the

Yes, it's working in 4.2.23. Thanks!

I fixed a bug in the HiQSDR when the clock is not a multiple of 48 kHz. I added more support for the IO board. Jim N2ADR

I will fix this in the next release. The correct solution is: dec = int(float(self.conf.rx_udp_clock) / rate + 0.5) the removal of one "/". Jim N2ADR

Yes, I added +450 Hertz to correct my quartz oscillator. As a result, I have 122880450.

Hello Nick, What is the value of "Clock frequency Hertz" on your radio hardware screen? Jim N2ADR

Quisk needs some sort of debug to find out why it's returning frequency incorrectly.... Mike W9MDB

Rig? You have lost me completely. I don't find anything in the quisk config screens that would seem to relate to your question. AFAIK, quisk is the rig and it has one VFO.