You are right. I will fix this in the next release.
?
Jim
N2ADR
|
Quisk Version 4.2.37 August 2024
Quisk now has a new option "Fixed tune offset" on the Config/radio/Options screen. This is meant for Softrock radios that need a constant audio frequency to simplify amplitude and phase corrections. The value zero means no change to Quisk tuning. Otherwise enter the fixed frequency offset from center. If you are using the obsolete "mouse_tune_method = 1" please delete it and use this new feature. If you use softrock_tune_vfo.py as your hardware file, you should replace it with softrock/hardware_usb.py.
?
Quisk now works on Python 3.12. And I fixed a bug in the small screen graph width.
?
Jim
N2ADR
|
I will fix this in the next release.
?
Jim
N2ADR
|
When clicking on a spot, in this case there should be a change?receiver frequency, not the transmitter. Now is transmitter.
Command FAxxxxxxxxxxx from Spots window to Quisk.
|
Hi,
I have configured Quisk with the small display option and set the dimensions to 800x480 pixels.? The control panel displays fine but the graph panel over runs the right side of the display. What (if any) configure parameter may be changed to display the full bandwidth?
?
73,
Ron
?
|
Hello All,
?
Thanks.? Quisk is working on a RPi 5 (Bookworm).? No changes were needed to the configuration of the operating system.? Python plays very well is the Wayland engine.?
?
I wish to send a BIG thanks to Jim for helping us (Multus SDR) with integrating our transceivers into Quisk.? We now have a SDR host application we can stay with, hopefully for the very long term.
?
73,
Ron
|
I've created a hardware file for the HL2 controlled by an ICOM RC-28 remote encoder:
?
Maybe that's helpful for someone else, too,
?
73 OE6HKE
|
I built my HiQSDR as a standalone box
originally with 7" display on Pi3 which was first replaced by an
ODROID-C2 and now uses an ODROID-C4 all using quisk.
HL2's using home built PiHPSDR v2's.
73 ... Sid.
On 11/08/2024 07:38, R.J. Butcher via
groups.io wrote:
toggle quoted message
Show quoted text
GM
?
I have used several implementations of Quisk/Raspberry Pi,
including touch screen, all very successful, all running under
Linux.? See my qrz.com page.
Current HF station uses dedicated Pi4 plus Hermes Lite with
HDMI display.? Alternative is HIQSDR.? Jim had a large hand in
all these designs.
?
I can see NO reason to use Windows.
?
73 Bob g3udi?
|
GM
?
I have used several implementations of Quisk/Raspberry Pi, including touch screen, all very successful, all running under Linux.? See my qrz.com page.
Current HF station uses dedicated Pi4 plus Hermes Lite with HDMI display.? Alternative is HIQSDR.? Jim had a large hand in all these designs.
?
I can see NO reason to use Windows.
?
73 Bob g3udi?
|
Hi,
This is most likely my first post to this group.?? We (Multus SDR) are moving to Quisk for our preferred SDR host application for a number of reasons, among them the cross platform capabilities.?? This leads me to the question I have.? For at least one of our products we have implemented an embedded RPi 4 (or 5).? Raspberry has moved to using the back end Wayland platform for the desktop.? Question:? Does Python3 / Quisk play nice with Wayland?? There is a configuration option to have Raspberry O.S. (bookworm) to revert to using X-windows.? (Note:? We are currently testing Quisk on a Raspberry Pi Zero 2 (bookworm) that only supports X-windows due to its hardware complement.? Quisk is running OK on it (just a bit slow).? The point is Quisk runs fine on bookworm with the X-windows back end).
?
So, once again, does Python3 / Quisk play nice with Wayland?
?
Regards,
Ron
|
For me this is not a big deal.? If WSJT-X is not installed to a system path everything works fine.
--
73, Stew
N8VET
|
Hi Ron,
?
I don't 100% remember the exact choice presented, but I installed Python to the system path per instructions and then there are usually 2 choices, current user and all users.? I always choose current user.
--
73, Stew
N8VET
|
Hi Stew,
When you installed Python what path did it update,? the system
path or the user path.? On my system, python is using the user
path.
73,
Ron / W4MMP
On 8/6/2024 10:43, Stew N8VET wrote:
toggle quoted message
Show quoted text
Hi Jim,
?
Neither command works with WSJT-X installed to path for all
users.? I only have one python version installed but gave the
second command a go.
?
Just to be clear.? I do have the popup for radio selection
but selecting a radio other than configfileradio, Quisk will not
load.
?
The shortcut is looking in the right folder for pythonw but
just to be sure here is the target and start in links of the
shortcut:
Target:
C:\Users\*user*\AppData\Local\Programs\Python\Python311\pythonw.exe
-m quisk
Start in:
C:\Users\*user*\AppData\Local\Programs\Python\Python311
--
73, Stew
N8VET
|
Hi Jim,
?
Neither command works with WSJT-X installed to path for all users.? I only have one python version installed but gave the second command a go.
?
Just to be clear.? I do have the popup for radio selection but selecting a radio other than configfileradio, Quisk will not load.
?
The shortcut is looking in the right folder for pythonw but just to be sure here is the target and start in links of the shortcut:
Target: C:\Users\*user*\AppData\Local\Programs\Python\Python311\pythonw.exe -m quisk
Start in: C:\Users\*user*\AppData\Local\Programs\Python\Python311
--
73, Stew
N8VET
|
Re: Filter setting and band tab not filling in
You may be using a Config File Radio. First create a new radio and then enter settings for that radio.
?
Jim
N2ADR
|
Hello Stew,
?
Please delete your old Quisk shortcut and create a new shortcut by right-clicking the screen. If there is only one Python on your PC enter the location:
?
pythonw -m quisk
?
If you need to specify the python version (eg, 3.8) enter:
?
pyw -3.8 -m quisk
?
Please let me know if it works.
?
Jim
N2ADR
|
Filter setting and band tab not filling in
I have tried all of the normal clicks and keys to fill in the address settings and cannot cause anything to enter. I am using a laptop and cannot figure this out.
?
Thanks
Ron Mathis
W0RGM
|
Thank you, that was very helpful. When WSJT-X is installed to the system path it puts its "bin" directory on the path. This directory has DLLs with the same names as Quisk DLLs and creates conflicts. When Windows has DLL conflicts it dies without an error message.
?
I will see what I can do about this.
?
Jim
N2ADR
|
Quisk Version 4.2.36 August 2024
I added two new color schemes by Michael, DK1MI. The On/Off button color and text color can now be configured. (Michael, send me the final colors). ?There are a few other small changes.
?
Jim
N2ADR
|
Hi Jim,
?
Running the command python quisk.py , Quisk will load properly when WSJT-X is installed to system path for all users.
?
My short cut to run Quisk per your instruction uses, "Use "quisk.exe" as the command and "Quisk" as the name. The "quisk.exe" program is in your_install_directory\Scripts" as the name" and this will not work when WSJT-X is installed to system path.
--
73, Stew
N8VET
|
Nick Abramenko RA3PKJ
Ron / W4MMP
Sid Boyce