开云体育

Hi Jim Thought I'd carry on adding digital voice modes to quisk. I'd previously added P25, I've now also included D-STAR. I've also simplified it a bit. Originally it used the op25 vocoder for TX and

Hi Jim, It looks like you fixed the problem with split mode Tx Lock indication, however, it still transmits on the Rx frequency (green line), until I Reverse Rx and Tx a couple of times. After doing

Hello Jim This is really a preference for those using python3 but in the "quisk" file in the install directory it starts with: "#!/usr/bin/env python" to set the environment. In the case of at least

Hello Jim, another one: The 'Menu/Radio-in-use/Timing and CW' has in the 'CW Settings for Remote and' below Keyup delay the edit box label of "Use" which probably should be 'Use Sidetone' 73, Graeme

Hello Jim, The levels label boxes have disappeared from the 'Menu/TX Audio' screen for setting the mic level. 73, Graeme ZL2APV

Hello Bj?rn, I need further education hi. Thanks for thT. 73, Graeme

jimahlstrom napsal(a): For even more flexibility could it support special variables in the name? E.g. the name in the config "base%d.wav" where the %d would expand to the number. Personally, I

Hello Graeme! Are you sure you don't mix up bits and bytes? 212kByte/s is around 1.7Mbit/s If not I'm very interested in how you have done your setup and your hardwarefiles. 73 de Bj?rn, SM0SBL

Hello Jim and Niels, @Jim The help text on the 'Window X' and 'Window Y' text boxes on the setup menu are the same as the 'Window width' and 'Window height' texts. @ Niels Thank you for that info

My remote quisk is started automatically at boot by adding this line to /etc/xdg/lxsession/LXDE-pi/autostart . cat /etc/xdg/lxsession/LXDE-pi/autostart @lxpanel --profile LXDE-pi @pcmanfm --desktop

Hello Jim, Gave Quisk a really good run this morning and made several recordings which all worked perfectly. I used your suggested setup with a Quisk sub directory in my Music directory and a base

Hello Bj?rn, I am surprised at your 1.7 Mbit as that is the traffic I get from the remote to my HL2. From remote to ctl-head my traffic is 212 kiB/s on receive and 198.7 KiBs on transmit. This is

Ok. Looking forward to that. It will reduce the bit rate a lot. Perhaps not all the way down to compressing using Opus or similar but very much easier to implement. If I calculate the bandwidth of

I improved the Config/Config and Config/TxAudio screens and added help buttons for all items. The File Record button no longer overwrites an existing file. It creates a new file each time it is

Hello Bj?rn, I will implement sample rate reduction from 48 ksps to either 8 or 12 ksps. It is not hard to do, but it will not be ready for the next release. Jim N2AD

I'm now up and running with remote Quisk. It works amazingly well and are very, very easy to set up! I will not be able to use it efficiently at my remote site where I use 4G cellular connection in

Hi Ben, I don't see this with WSJT-X 2.5.4. Do the HL2 relays click when changing bands with WSJT? Does anyone else see this? The design is based on button clicks being sent to the remote, so I guess

Hello Andy, I am glad you have your Globemaster working. Switching from CWL to CWU should leave the received CW tone unchanged provided it is exactly the tone frequency specified on the "Timing and

Hi Ben. No, Quisk now terminate as expected when i close the window. I"m now a very happy user of both quisk and HL2 after not using my HL2 since I bought it a few years ago. Now I just have to

Very good! Do you still see the segmentation fault (seen on 32-bit RaspPI OS when closing Quisk) on the HamPi 64-bit OS? -- Ben, AC2YD --