开云体育

Hi Bruce, I am running Quisk via python 3 on mint 19.2 and recently upgraded to 19.3 and it has worked perfectly for me with both versions. I suspect that it is something in your setup rather than a

Hi Jim, That "ON" button behaves strangely in Linux Mint 19.2. When Quisk starts initially, it's green and Quisk runs. Clicking on that, Quisk freezes and the button turns to the white-on-grey default

I haven't got the nanoPi Fire3 running currently but it certainly was very fast though only with one USB port (USB 3.0). With 4GB the Pi4 should be a better performer, I'll give it a miss as I have

My experience with the RPi3+ is that you can run both Quisk and WSJTX at the same time without audio problems, but that was with the Jessie. I think Buster made things a lot slower. I was however not

Hi all, My findings when getting more familiar with Rpi 3B+: 1) Quisk Digital Input and Output became available when WSJT-X was running together with QUISK 2) Choppy output from QUISK when Digital USB

Hello Bruce, Thank you for the excellent description of how to set up SoftRock-type radios. It is exemplary that you will take the trouble to make other's setup easier. Jim N2ADR

Jim's the real deal here as far as supporting new radios. I only use Hermes-Lite2's and a HiQSDR standalone using an ODROID-C2 and a 7 inch LCD at the moment. The HL2's are on the LAN and quisk

Thankyou for your efforts ... Sid and I bvb would send each other install hints and scripts .... Bty ... openSUSE has been the most easy to get quisk working on .... even if the python scripts for

Maybe this is a good place to document the end result of my recent effort to move from a Windows based system to Quisk in Linux Mint 19.2. With a lot of help from Jim, my Multus-SDR Proficio is now

Thanks for the prompt to look again at the doc's. I did and realized I had been interpreting the information according to presumptions picked up from other sdr applications. With a little more

Hi all, As I am out-of-office (qth) right now, I will let You know as? i will be back (tomorrow ???). From my experience in the past, I am confident that problems like this will be solved in a way or

Yes, the two quisk digital devices are created when quisk starts. In first start, they won't show in the available devices. Let me know how performance is... I'm using a pi3b+ with my softrock but

If you have pavucontrol installed, click on recording and you should have the settings as screenshot below. With DGT-U button pressed, make sure the filters aren't set to narrow. (Using pi4.)

Hi, This is quite new to me, have to try it ASAP.? Tks ! Actually, there was a problem this time when installing WSJT-X and I have not been able to run those simultaneously. With my other

In my experience, the QuiskDigitalOutput Input shows up in Quisk after you have run WSJT-X the first time. Not sure why. Arlen (WA6AUF)

OK, Karl-Heinz K., looks like it works for some, hihi. I need to study my Pi system in more detail and maybe re-start from scratch as the other Karl-Heinz anticipated ...? I was considering Pi 4

It works for me. There was a thread a couple of weeks ago with some information about my setup. I’ve never had a problem with the digital input/output not showing up.

Hello group, Just received Raspberry Pi 3B+ (from Santa Claus) and installed the latest version of Rasbian. I installed QUISK as I have done with my other Linux computers (Linux Mint 19) but cannot

Hello Bruce, To connect the digital devices, please push the Help button and select "Documentation" and then "Digital Modes". The digital modes use special devices. Jim N2ADR

In linux mint 19.2, setting up fldigi, wsjtx and js8, I began with the assumption that DGT-U mode was the proper selection on the panel. Quisk's "Radio Sound Output" is set to