开云体育It could also be FDV instead of DGT, the pattern is identical, it does not say which one. ? From: [email protected] <[email protected]>
On Behalf Of Mike K7MDL via groups.io
Sent: Wednesday, February 26, 2025 12:28 PM To: [email protected] Subject: Re: [n2adr-sdr] Quisk 4.2.41 Remote Hermes crashes ? I ran into the same type error last night doing some Python code work.?? In my case it was due to a missing parameter in a config file that I was trying read and use.? Since it was an empty value it raised this error. ? The error appears that while trying to set the value for self.mode in quisk_hardware.py on line 654, maybe the variable DGT is blank or invalid as it is set to a value of NONE causing the error.? ? If you were in a SSB mode you might not see this error.?? You would want to track down where DGT is initialized or last updated, maybe read from a config file. ? The exact problem lies in the error statement TypeError: 'NoneType' object is not subscriptable ? Where you see NoneType in place of DGT. ? ? ;/home/pi/.local/lib/python3.9/site-packages/quisk/hermes/quisk_hardware.py", line 645, in SetTxLevel ? ?
? From:
[email protected] <[email protected]>
On Behalf Of Joerg DB2OO via groups.io ? I have Quisk 4.2.41 running fine on a Debian Bullseye PC together with a Hermes Lite 2 on the same network with just a Hermes radio configured in Quisk. ? Now I wanted to try the Quisk HL2 server and clienet configuration: I created a "Hermes-Server" Quisk radio on the Debian Bullseye PC, following the instructions by G4ZAL's . The "Hardware file path" is "/home/pi/.local/lib/python3.9/site-packages/quisk/ac2yd/remote_hermes.py". When I start Quisk with the configured "Hermes-Server" radio, it will immediately crash with these error messages: ? quisk I thought the problem might be the Quisk Widgets and so I cleared the "Widget File Path" in the "Hermes-Server" configuration, but the crash did not go away. ? Any ideas, what is going wrong? --
|
