开云体育

Hi Heikk1,
I still keep all that old stuff around.
in one of the subdirectories there.

#./usbsoftrock --help
./usbsoftrock: invalid option -- '-'
usbsoftrock 1.0
usage: ./usbsoftrock [OPTION] COMMAND

OPTION is one or more of
?-a ????????????????????????????Advanced firmware present
????????????????????????????????i.e. let the firmware calculate registers
?-d ????????????????????????????Enter a mode that listens for commands via UDP.
?-i <address> ??????????????????I2C address in DECIMAL (DEFAULT = 85 (0x55))
?-m <multiplier> ???????????????Multiplication factor for frequency (DEFAULT = 4)
?-p <port num> ?????????????????Port to listen for UDP datagrams (DEFAULT = 19004)
?-s <startup frequency MHz> ????Factory programmed startup frequency (DEFAULT = 56.32)
?-v ????????????????????????????Verbose output (fairly useful)
?-vv ???????????????????????????Even more verbose output (debugging)
?-x <calibrated xtall freq MHz> Corrected XTALL frequency of Si570 device calculated
????????????????????????????????through the use of the calibrate command immediately
????????????????????????????????after startup.
COMMAND is one of
?calibrate (may require -s option)
?getfreq
?getregisters
?interactive
?ptt {on|off}
?set bpf {on|off} ??????????????????????(PE0FKO+TF3LJ+Mobo)
?set bpf_addr <band> <filter> ??????????(PE0FKO >= 15.12+Mobo
?set bpf_point <crossover> <f in MHz> ??(PE0FKO+TF3LJ+Mobo)
?set lpf {on|off} ??????????????????????(TF3LJ+Mobo only)
?set lpf_addr <band> <filter> ??????????????????"
?set lpf_point <crossover> <f in MHz> ??????????"
?set freq <frequency in MHz>
?set si570_addr <i2c address in decimal>
?set si570_multiplier [band] <decimal factor> ?(PE0FKO>=15.12+Mobo)
?set startup <frequency in MHz> ????????(PE0FKO+TF3LJ+Mobo)
?set xtall <frequency in MHz> ??????????(PE0FKO+TF3LJ+Mobo)
?status

?where TF3LJ = Lofturs AtMega168 derivative
???????Mobo ?= Mobo 4.3 Project AT90USB162 Firmware
-------------------------------------------------------------------------------
73 ... Sid.

--
Sid Boyce ... Hamradio License G3VBV, Licensed Private Pilot
Emeritus IBM/Amdahl Mainframes and Sun/Fujitsu Servers Tech Support
Senior Staff Specialist, Cricket Coach
Microsoft Windows Free Zone - Linux used for all Computing Tasks