Hello Jacinto,
Thanks for the report!
Yes, I do see the segmentation fault on RPi4 raspian when closing
Quisk.? This RPi4 is directly connected to HermesLite2.? I see the
segmentation fault both when running the remote, as well as the
non-remote (traditional) Hermes Quisk radio.? It does not seem to
affect behavior while running.? I have Quisk ask me which radio to
use when starting up , and I notice that it does not remember
which Radio I last used (e.g. Remote HLT2 vs. Local HLT2).
NOTE:?? Before installing the new (remote) Quisk on RPi4, I did a
full OS upgrade, and noticed that the latest Python for Raspian is
3.7.3 ... I believe Jim recommends 3.8 or 3.9 ... I don't know if
this is a factor, but this is a good opportunity to mention it ...
again, things seem to work well while running.
I also upgraded my Ubuntu desktop to 22.04, and noticed that
provides Python 3.10.4, also outside the range Jim recommends.? I
don't know if that could cause any problems, but it sounds as if
it is working well for you ... the Ubuntu 22.04 upgrade also
provided Quisk 4.1.93.? I have not tested any Quisk on this
upgraded machine yet.
I will need to defer to Jim to answer the questions about MIDI.
Can you tell us what kind of network you have (ethernet, WiFi,
internet?)
THANKS!
-- Ben, AC2YD --
On 9/19/22 08:15, Jacinto Rebelo wrote:
toggle quoted message
Show quoted text
Hello all,?
it has been a while since I used the quisk software?but this new
remote function is really great ... I do have some questions but
first I will describe my working system test:
?
HemesLite1 + PA 100W
SBC jetson nano with ubuntu 22.04 as remote radio quisk?
?
SBC RPi4? raspian as control head quisk
WM8731 audio card connected on gpio (i2c + i2s)?
I tried a few RPi4 OS images and all of them give me
segmentation fault when I exit quisk
this is compiled from source or installed?with PIP, now with
the jetson nano and ubuntu this will not append,?does anyone
else have this problem?
?
Also, I do have a midi controller and I tried first with
quisk and radio direct and it works very well with all
functions, by the way, I didn't find the VFO in the knob list?
did I miss os it doesn't exist?
?
Now, if I use midi connected?to the control head quisk SBC I
can assign?the functions?to the controller and the buttons?and
sliders change position and color but don't do anything, if I
use the mouse it works ...
?
I spend all Sunday testing and didn't find any solution, it
can be something I'm still doing wrong or a bug?
?
Regarding stability, I can say that it's really strong, it
worked a few hours in remote mode, tested transmission (audio
it's good), and not even a single problem, so for an
experimental version, it's in a good way ...
?
?
also, the power meter calibration works very well
after creating a new table on the remote radio ...
73
Jacinto Rebelo
cu2ed
?
