开云体育

Hi Carlos, I'm assuming that?the 2 x 2N2222 type design is similar to the M0AYF circuit in the files section

No matter what the antenna, the Safety concerns are the same. So basically, the article says to stay an “Occupational safety distance” of at least 11 feet from a 100 watt 10-40M loop that is 3

Hi Andy, I did not express myself properly. It is just about RX. I have a G5RV antenna I have been using for receiving purposes, no TX here. I can detect strong intermodulation products when

Hello, I do not own a W2LI mag. Loop, however, I do own a Chameleon F Loop Plus. I also build mag. loops for multiple or different frequencies. Anywhere from 80 to 2 meters. I have experimented in

Transmitting or receiving? I guess you want to filter the AM and FM signals for when you are receiving, in which case the loop's impedance may be less important than the input impedance of your RX.

Perhaps before using a small magnetic loop antenna for transmitting you should review this

Jim, Type in *W2LI Magnetic Loop Antenna *on your browser, whereupon you will gleam a lot of info on the W2LI *QRP MLA*, that is made and sold by Tri County Radio Association, which has on its

I recently acquired a W2LI magnetic loop. Does anyone out there have any operating or usage suggestions or experiences you could share with me. I operate mostly QRP. 72/73, Doc K2PHD FN20qv

Hi,? This has been discussed before, but I can not find a definitive answer within the old messages.? I live in Canberra (VK1) in between the AM and the FM broadcast transmitters. I can not think

Farmerik, I'm really liking this new loopantenna group location. I noticed everything transferred including all files and pics.You can see my stacked toroid pics on page 3 of pics. It truly shines on

I posted about making the move. I got positive feedback. I moved this and several other Yahoogroups. This group is meant to replace the Yahoogroup loopantennas. I've set the other one to not allow

There are littery thousands of photos on Google images....? perhaps one from there as long as it is not copy righted. 73 Rod W8GRI

Folks, I don't understand. Is this a spin off group or the continuation of the one on Yahoo? I found myself subscribed to a new group without really knowing what is going on. I don't have a problem

Yes, please, suggestions for the group image are welcome. -- Steve Greenfield AE7HD

Yes. Well done!

Hello. Have you looked at Chameleon antenna web page? They have a starter set up or kit. It has a dual section cap with a 3 1/2 turn attachment, a approximate 144 inch length of LMR400 coax and 4 uhf

You might take a look at the RML line of Alpha Loop systems for ideas here http://alphaantenna.com/index.php?main_page=advanced_search_result&search_in_description=1&keyword=RML Although these are not

I built a 10' circumference loop made of 3/8" copper tubing some time ago, and only used it once at 5w with a lossy capacitor.? Very hard to tune. I'd like to try using coax as a capacitor (as with

So you guys finally made the jump.? I did with my groups 6 months ago and never looked back.? ?I think you will be very happy with the performance on groups.io, and the support is top-notch.? If

Greetings FARMERIK, I have, before me an antenna consisting of a 30inch length of plastic electrical conduit, inside? each end of the conduit a 9inch ferrite rod is secured. Over each rod a coil is