开云体育

Sign up for their newsletter at https://amateurradiostore.com/ https://amateurradiostore.com/ to get product updates from Alpha Antenna like those I shared. I also was able to preorder the QRP

Loop Antenna News and Information ForumWith all the forwards on the previous post, it’s kind of unclear who exactly posted the various messages, but I want to say, “THANK YOU!” This is just the

Some naivete on my part here ... but if the loop antenna is suitable for transmitting, then I'd think it shouldn't need a preamp. The preamp is helpful when the loop is untuned, and the loss

You could use a pair of coaxial relays up on the mast to switch a preamp in and out. Just be sure to short out the preamp input when in the XMT mode. Chris Trask N7ZWY / WDX3HLB Senior Member IEEE

This gentleman has a very complete presentation, and discusses the pitfalls and things to be wary of: http://brisdance.com/vk4amz/LOOP.html Jim

I will be purchasing some material from a local ham to build an active receive loop in the near future. That being said, I also have a KX3. It doesn't get a lot of use; however, I'd like to start this

Correction, a magnetic loop is Not Too Small for these bands, there is no set size for a magnetic loop antenna. Just like any other antenna, the size is governed by what frequency is being used. A

Yes! Please send the resource links. I think everyone in the group would benefit from the information you are about to share, so I've included them on this email. Also, I just received the following

I just got myself an Alpha Loop not too long ago, and find that tuning to till I hear the loudest noise floor is very easy, then I transmit and get DX results on 10 and even 1 watt! I've only found

Several HAMs are using loop antennas nearly daily (especially Greg N4KGL with AlexLoop) and having great success with them. See his and other posts on the RaDAR group (Rapid Deployment Amateur Radio):

RF-PRO-1A no longer available - (VERSION-1) of the current RF-PRO-1B slight design changes - a few other component upgrades - enhancements.

Can any one tell me what the differences are between the Pixel Pro-1A and the 1B? Thanks Kevin

Wow, Andrew, a happy customer - and former Pixel, although he didn't identify the model, owner! You haven't converted me. I see one possible way... I have a similar spot in my walkup tall attic where

I was wondering how much work has been done and would like to see some discussion on Loop antennas for 75 meter and 160 meter band. I for one have the most trouble with these two bands due things

This is what amateur radio is all about! https://sparks31.wordpress.com/2014/01/22/on-the-air-hf-low-power-qrp-comms-established/

Below is a message received from Tim last October. Kind regards Andrew

John wrote on Feb 4, "If you need help in deciding between the Pixel and Wellbrook units, consider this; BNC connectors, a la the Wellbrook unit, are not weather-rated and are most often used with

RYRYRY _____ From: loopantennas@... [mailto:loopantennas@...] On Behalf Of Andrew Ikin Sent: 04 February 2014 21:03 To: loopantennas@... Subject: [loopantennas]

Chris Trask wrote on Feb 4. "In my design (in the group files section) I chose a 12V supply rail as it was best suited for direct operation from 12V batteries, such as Gel Cells, which would take care

The quick brown Fox jumps over the lazy dog 1234567890