Hi Chris,
That's what I thought and makes more sense. I assume that the higher
the gain, the less feedback and less IP2/IP3?
Rob
--- In loopantennas@..., "Chris Trask" <christrask@...> wrote:
Signal gain can be achieved by adding an additional resistor
between the 2N2907 emitter and the J309 source. Doing this
will require a higher supply voltage so as to provide
sufficient overhead to prevent saturation.
Can you clarify this statement? It appears that this would be the
same as connecting a resistor from Vcc to the J309 source?
Ooops! It should have said between the 2N2907 COLLECTOR and the
J309
source. The output is then taken from the 2N2907 collector.
Chris
,----------------------. High Performance Mixers and
/ What's all this \ Amplifiers for RF Communications
/ extinct stuff, anyhow? /
\ _______,--------------' Chris Trask / N7ZWY
_ |/ Principal Engineer
oo\ Sonoran Radio Research
(__)\ _ P.O. Box 25240
\ \ .' `. Tempe, Arizona 85285-5240
\ \ / \
\ '" \ IEEE Senior Member #40274515
. ( ) \
'-| )__| :. \ Email: christrask@...
| | | | \ '.
c__; c__; '-..'>.__
Graphics by Loek Frederiks
