开云体育

For ic-7000: I need to have the tuner select the correct memory automatically when I change bands

Don Rolph All Messages By This Member #893 I presently?have an IT-100 tuner. What tuner do I need which will detect the new frequency and select the correct memory location for that band? Thanks in advance. And have a happy and safe holidays! -- 73, AB1PH Don Rolph
KC7C Erik Montgomery All Messages By This Member #894 I have run the LDG Z100plus tuner for 7 years with the IC7000 mobile.? The tuner reads the frequency by RF.? Every band change or frequency changed out of the memory channel saved will prompt the radio to quickly send the tune signal to the tuner the moment you touch the PTT on the mic.? It will only quickly switch to that memory and not do a full tune once the memory has been saved.? If a memory has not been saved and the tuner sees a need to tune, it will do a full tune cycle and save it in the memory.??
Don Rolph All Messages By This Member #895 Thanks! toggle quoted message Show quoted text On Sun, Dec 25, 2022 at 7:42 PM KC7C Erik Montgomery <kc7c@...> wrote: I have run the LDG Z100plus tuner for 7 years with the IC7000 mobile.? The tuner reads the frequency by RF.? Every band change or frequency changed out of the memory channel saved will prompt the radio to quickly send the tune signal to the tuner the moment you touch the PTT on the mic.? It will only quickly switch to that memory and not do a full tune once the memory has been saved.? If a memory has not been saved and the tuner sees a need to tune, it will do a full tune cycle and save it in the memory.?? -- 73, AB1PH Don Rolph
Mike Olbrisch All Messages By This Member #896 开云体育 IC-7000.? I -=THINK=- I have a tuner here in a box somewhere, an LDG-7000?? It was made to work with the IC-7000.? The IC-706 has the same tuner interface, and this “7000” (if that is the right number) was used for a short time, a WW-II veteran was stuck in an assisted living center, no antennas allowed.? We got a piece of Stealth Wire out the window and into a tree.? The head of grounds maintenance saw it, but he was a Viet Nam vet and gave the wire approval. Shortly after all of this, the WW-II vet died.? I was willed all his equipment. And its in a box here somewhere.? Was there an LDG-7000 tuner for the Icom line?? Maybe I should find it all and see what I have.? I doubt I’ll ever use it, IC-706 Mk-IIg and a tuner.? I think there was a PS-xx power supply too.? PS-55?? It was all Icom gear and the small tuner, that’s all I remember. ? ? ? Vy73? –? Mike? –? KD5KC – WRFF851 –? El Paso – Texas? –? DM61rt.? SOTA W5T-Texas Association Manager. ? The canyons are calling, colorful and deep.? But I have promises to keep. And miles to go still in my Jeep...?? And miles to go still in my Jeep... ? ? ADVENTURE:? The respectful pursuit of trouble.?? An EXIT is really an ENTRANCE to someplace new.? It isn’t an ADVENTURE until something goes wrong! ? ? ? toggle quoted message Show quoted text From: [email protected] <[email protected]> On Behalf Of Don Rolph Sent: Sunday, December 25, 2022 18:40 PM To: [email protected] Subject: Re: [ldgelectronics] For ic-7000: I need to have the tuner select the correct memory automatically when I change bands ? Thanks! ? On Sun, Dec 25, 2022 at 7:42 PM KC7C Erik Montgomery <kc7c@...> wrote: I have run the LDG Z100plus tuner for 7 years with the IC7000 mobile.? The tuner reads the frequency by RF.? Every band change or frequency changed out of the memory channel saved will prompt the radio to quickly send the tune signal to the tuner the moment you touch the PTT on the mic.? It will only quickly switch to that memory and not do a full tune once the memory has been saved.? If a memory has not been saved and the tuner sees a need to tune, it will do a full tune cycle and save it in the memory.?? ? -- ? 73, AB1PH Don Rolph
Mike Olbrisch All Messages By This Member #897 开云体育 Found a photo of it.? The IC-706 Mk-IIg radio face was hung from under the top shelf.? The IC-706 Mk-IIg main chassis and the LDG tuner was up above the shelf just above the face.? And the Power supply was to the left on the shelf.? It was a couple of months after we got it working that he died.? IIRC, it had a 4-wire control cable and was controlled by the TUNE function of the radio. ? toggle quoted message Show quoted text From: [email protected] <[email protected]> On Behalf Of Mike Olbrisch Sent: Sunday, December 25, 2022 20:35 PM To: [email protected] Subject: Re: [ldgelectronics] For ic-7000: I need to have the tuner select the correct memory automatically when I change bands ? IC-7000.? I -=THINK=- I have a tuner here in a box somewhere, an LDG-7000?? It was made to work with the IC-7000.? The IC-706 has the same tuner interface, and this “7000” (if that is the right number) was used for a short time, a WW-II veteran was stuck in an assisted living center, no antennas allowed.? We got a piece of Stealth Wire out the window and into a tree.? The head of grounds maintenance saw it, but he was a Viet Nam vet and gave the wire approval. Shortly after all of this, the WW-II vet died.? I was willed all his equipment. And its in a box here somewhere.? Was there an LDG-7000 tuner for the Icom line?? Maybe I should find it all and see what I have.? I doubt I’ll ever use it, IC-706 Mk-IIg and a tuner.? I think there was a PS-xx power supply too.? PS-55?? It was all Icom gear and the small tuner, that’s all I remember. ? ? ? Vy73? –? Mike? –? KD5KC – WRFF851 –? El Paso – Texas? –? DM61rt.? SOTA W5T-Texas Association Manager. ? The canyons are calling, colorful and deep.? But I have promises to keep. And miles to go still in my Jeep...?? And miles to go still in my Jeep... ? ? ADVENTURE:? The respectful pursuit of trouble.?? An EXIT is really an ENTRANCE to someplace new.? It isn’t an ADVENTURE until something goes wrong! ? ? ? From: [email protected] <[email protected]> On Behalf Of Don Rolph Sent: Sunday, December 25, 2022 18:40 PM To: [email protected] Subject: Re: [ldgelectronics] For ic-7000: I need to have the tuner select the correct memory automatically when I change bands ? Thanks! ? On Sun, Dec 25, 2022 at 7:42 PM KC7C Erik Montgomery <kc7c@...> wrote: I have run the LDG Z100plus tuner for 7 years with the IC7000 mobile.? The tuner reads the frequency by RF.? Every band change or frequency changed out of the memory channel saved will prompt the radio to quickly send the tune signal to the tuner the moment you touch the PTT on the mic.? It will only quickly switch to that memory and not do a full tune once the memory has been saved.? If a memory has not been saved and the tuner sees a need to tune, it will do a full tune cycle and save it in the memory.?? ? -- ? 73, AB1PH Don Rolph

Previous Topic Next Topic