开云体育

Ryan, The AT-7000 works pretty much the same as any LDG tuner, they are all basically the same except for the interface cables.? If you can make or find a cable that will work with the AT-7000 and

Any chance it’s just going into Bypass mode the first time? Or connecting to Ant 2, and you have a dummy load there? If you “save” the correct tune, does it go there automatically the next time?

What radio? Sounds like it might be T/R relay circuit sticking. 73, Ken, KJ9B <miles.04.spirals@...> wrote:

What rig are you trying to use the Z100 with??? I have Z100 and have used with my IC705.? There is a control cable between them and on IC705 in menu has TUNE button that will force the rig to key,

The Yaesu FT-891 does not provide the necessary _START signal to directly operate the LDG AT-7000. Yaesu rigs send serial CAT commands to the FC-40 or FC50 Yaesu antenna tuners. You will have to wire

Interesting “feature” with my At-1000 pro 2. When I tune on 10m it will sometimes tune a good SWR, but the band sounds dead - no noise, no nothing. A retune and the band is full of life. This only

It is basically the same as the later units, but the relay logic is different. The control is the same as the later model Icoms. You can rig some of the manual switches to make it tune like the Icom

There is a lot of comments on the QRP-labs group cautioning against use of auto tuners on simple qrp radios. Simple qrp radios dont have much protection against high swr. As tuners spend a few seconds

Your option 1. (1) Press the TUNE button on the tuner then send a signal from the radio; Leonard K. Pennock AD7AS Those who walk bravely through life, unafraid of loss or failure, find that they very

I have come into possession of an LDG Z-100A tuner that I would like to use as part of a portable travel kit with my home-brew CW rigs, running 5-25W.? It's small, light, versatile, and consumes

I have an AT-7000 designed specifically for the Icom IC-7000.? Unfortunately the radio is gone.? Is it possible for the AT-7000 to work with a Yaesu FT-891?? I have not been able to find any info

hello AL the tuner is still available... my email is saukp@... email me there an i will send you pics or checkout https://swap.qth.com/search-results.php?keywords=1627210&fieldtosearch=ListingNo

If still available, I’ll take it. I bought an AT-600 but I’d rather have the RT AL K5TAN

i have for sale LDG RT600 & RC600 details on qth.com https://swap.qth.com/view_ad.php?counter=1627210 Paul K3SF

Thanks David Get BlueMail for Android

Joe, The computer port on the Z-817 is just a pass-through for serial data from the radio to a PC. This way you can run CAT software on your PC and use the tuner at the same time. I don’t believe

Hi Steli Did you find the hex file for it100? I have the same problem, and LDG have no answer... 73 Chris CT7ANH

Many people say that you can’t interface the 101 with a Non Yaesu Tuner via its Tuner mini DIN Socket as Yaesu have used a different method of triggering a tune cycle on the Yaesu Tuners. ?I did

DX Engineering is where I got mine. https://www.dxengineering.com/parts/ldg-y-acc-2

I see both of them sold on Ebay. Just do a search on Ebay for Y-ACC-2 or 3. Phil Laird, WI5O