开云体育

Hi. Can anybody help me? Which control cable to use to connect?Yaesu FTDX 101D 8 pin Din Tuner port to? LDG1000proII ? Yaesu support has no idea and they have washed their hands off. LDG support is

In the ProII I bought new in December the battery pack is installed as OEM, and it is secured on top of the board components, not to the top case. FWIW. Glenn / WE9K

Double-sided tape on mine. Micky K1XH Links: ------ [1] /g/ldgelectronics/message/257 [2] /mt/89413772/1045683 [3] /g/ldgelectronics/post [4]

I ordered an 8 AA tray and see clearly where the leads attached to the circuit board, internally.? ?How have you attached the battery pack to top lid so it doesn.t move about freely possibly

I have 2 new AT600 for sale.? One is brand new from LDG to replace a rt-600 that went out.? The other is one I used about a month while they were looking at the RT-600.? Unfortunately, I need a

That IS interesting. Wonder if one's a typo or something unintended? I'd be wary about running digimodes above 30-40 W. My autocouplers seem to die from lightning events... :)? I have two SGC units

Very interesting

I have 2 manuals. One (Rev B) says :0.1 to 125 watts SSB and CW peak power, 100W on digital modes and 6 meters. The other (Rev A) says: .1 to 125 watts SSB and CW peak power, 30 watts on PSK and

I noticed some of the other LDG tuners have a 10 W digital limitation however this one definitely does not. I wonder if it was omitted in the instruction manual?

Kirk, I routinely run my 991a at 75-80 watts into a MFJ 994E turner for FT8. I might scale it back. I do believe I was using the 991a when I smoked the Z11 Pro II. A stray jolt from a lightning strike

Rick, I'm surprised that you didn't also smoke your TX, as almost every 100-W TX out there has to be "derated" to 25-30 W for continuous-duty service. Almost every autocoupler is the same. Want an

I "burned up" an LDG Z11Pro II. I put too much wattage through on 6 meter FT8. Apparently it should have been less than about 30 watts. I used 100. It would not tune. A buddy opened it up. At least 2

Hello, I've had two failures of the Z11 Pro II tuner this year (smoke and burning electronic smell). Both purchased new from DX Engineering. The first one failed within 2 days and now the second one

Glad you got the problem figured out! Happy QSO's 73 Doug WA7DJS

Thanks for the information. I had a wire in the wrong place on the DB-9. Right colors, wrong place. Don't know where I found the info to wire it in the first place, but it is right now. Thanks to all

https://ldgelectronics.com/index.php/products/accessories/cables/ No brainer here. This is from the LG website and the part costs $US10 already made. Neil VK5ZEE Sent: Saturday, 15 January 2022 16:53

Hi Mike, There are no numbers on the Molex connector but if I start from the pointed end: Pin 1 - Green wire - pin 7 on DB9 - Radio out Pin 2 - White wire - pin 3 on DB9 - Tune Mode Select Pin 3 - Red

Doug; Thanks for the reply. I have tried it on a dummy load. No difference. If you send a pinout of the cable would be great. I will consider the purchase of the cable at a later time Thanks 73 Mike -

Hi Mike, I recently bought an RT-11 from an estate auction. It came with the Icom wiring. I'm using it with a Kenwood TS-2000 so I built a smaller version of the remote head and that setup has been

Howdy; I have an LDG RT-11 tuner that I am wanting to use with my Icom IC-725. It just doesn't seem to be working. I press the tuner button on the radio, it looks like it is working, and then stops