Assuming have the tuner in full auto tuning mode you, you should be able to just start transmitting and it will seek the learned memory channel automatically.
If you are running in semi auto mode you don't want to hold the button until the bars come together as that is indicating you want it to do a full tune. Instead release the tune button in about 1-2 seconds and it should immediately find the match from memory.
PS check your manual for "Manual Memory Tune".
Leonard K. Pennock
AD7AS
Those who walk bravely through life, unafraid of loss or failure,
find that they very rarely lose or fail.
toggle quoted message
Show quoted text
On 12/30/22 11:36 AM, Paul Palmer wrote:
I have an LDG 600 Pro II tuner. Every?time I change bands I put the xcvr into AM mode, hold down the Tune button and press the transmit button on the mic, when the?bars on the pwr display come together I release the Tune button and keep holding the mic transmit until the clicking stops. Then I do a trial xmit to verify a good tune. If it's good i press Func Tune to save that tune. My question is how do I _/permanently/ _save that setting for the next day? I leave the tuner plugged in to the ac but turned off.
Thanks, Paul, KG5TBT
On Fri, Dec 30, 2022 at 12:12 PM VA3SYS <i0x915@... <mailto:i0x915@...>> wrote:
I¡¯ve watched 49:1 unun disappear from the shelves over past year,
its also gone from the manuals now as well. any particular reason to
get rid of it ?
are there any plans to bring it back ?
thanks
