Al no I¡¯ve not changed antenna config,sometimes it wipes the operating frequency completely off the radio display ,and tuner switches to bypass mode ,today I¡¯ll give the Tuner Manual a good perusal and Radio Manual ,thanks Al 73 Dave 2E0DTB ,50 to 70 mph wind gusts today?
My take would be the tuner can¡¯t tune the load.? Did you accidentally change the antenna selector on the tuner?
What happens if you set the 7000 on CW at low power, key it, and hit the tune button on the tuner?
?
All else failing, reset the tuner.
?
Al K5TAN
?
?
Guys I hope you don¡¯t mind me hopping on this thread,I have an Icom 7000, i too have have an LDG AT-100Proll Autotuner ,I¡¯m using the supplied interface cable from radio to LDG Tuner,all was fine till recently ,when I iniate a tune cycle ,it now takes 15-20 seconds to complete tune cycle ,and tuner goes into ByPass mode ,I can clear ByPasss mode by pressing C Up button ,but that don¡¯t seem right ,any help I would really ?appreciate ,as I say sorrry if ive highjacked this subject ,73 2E0DTB,look forward too replies ,Dave
