开云体育

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Lagooncatowners
  2. Messages
Expanded Topics Messages Polls
Date
Re: L400 Haul Out near Myrtle Beach SC

 

开云体育

If you are coming to Charleston, you might try Palmetto Detyens yard. It is about 20 miles up the Cooper River, but is one of the few yards with a travel lift wide enough to haul a cat. They are 24 feet wide. Just had my cat up there. It is do it yourself if you want. Not hard to do Check U-tube. You can have Bill Darden at City Marina order parts. Detyens is 843-553-0091 and Bill is either 843-278-4928 or 843-830 2116.Best of luck. Ben( Katmandu)

?

Sent from for Windows 10

?

From: Marcus via Groups.Io
Sent: Tuesday, January 15, 2019 3:40 PM
To: [email protected]
Subject: [lagooncatowners] L400 Haul Out near Myrtle Beach SC

?

Hello,?? Been heading South and now It appears I have seals leaking on my sd50 saildrive.? Needing a place to be hauled out somewhere around Myrtle Beach SC. so I can get new seals installed. ? L400 with beam = 23ft.8"

Any suggestions appreciated.

?

783A0233F085439E966B6DD82031F743.png

Re: Where to buy rudder bearings

 

PYI also sells rudder bearings as I had to change the rudder post that were built out of aluminum that corroded inside out.? The new ones are Fiberglass tubes that should last a lifetime with removable bearings.

As for Phil, www.pyiinc.com
---

Jeff Russell / Mack Sails
Ft. Pierce, Fl.?
772-475-9888
S/V Vitesse Lagoon 55S
Re: Where to buy rudder bearings

 

Thanks Geffroy. I appreciate it. (And your English is great!)
--
Paul Bennett
Dafne II
Lagoon 500
PNG
Re: Where to buy rudder bearings

 

Thanks Dave. We're in PNG, headed that way, which is convenient.
--
Paul Bennett
Dafne II
Lagoon 500
PNG
Re: Where to buy rudder bearings

 

try Simpson Marine in Phuket as the Asia Lagoon dealer.

There a few Lagoon charter boats in Phuket that regularly lose their rudders!!

Dave
Shaken Not Stern
(not chartered)
Re: Where to buy rudder bearings

 

Hello
sorry m’y English is very bad, but you can try:
agent lagoon
chemins d’océans
Avenue Jean d’AGREVE
83400 HY?RES?

Contact:
Florence BRUNEAU?
flb@...
0033(0)494657425

Thierry GEFFROY?
LAGOON 420
FOX TEAM
MARSEILLE
Re: Where to buy rudder bearings

 

Hello,
Sorry my English is very bad!
Try: chemin d’ocean.
25 avenue Jean d’Agrève
83400 HYERES FRANCE
AGENT LAGOON

Florence BRUNEAU
flb@...
0033(0)4 94657425


Best regards
LAGOON 420
Fox Team
Thierry GEFFROY
Where to buy rudder bearings

 

I need to replace the rudder bearings on my Lagoon 500. Does anyone know where to source these? I find Lagoon HQ in France to be unresponsive.?

--
Paul Bennett
Dafne II
Lagoon 500
Currently Papua New Guinea
Re: L400 Haul Out near Myrtle Beach SC

 

st Augustine marine center can handle you. there are two yanmar mechanics that can change your sail drive seals

tim
sv folie a deux
L380?
Re: L400 Haul Out near Myrtle Beach SC

 

One day north to Wilmington, Wilmington Marine Ctr or Bennett Brothers.
Re: L400 Haul Out near Myrtle Beach SC

 

Marcus,?

You aren’t too far beyond Wilmington/ Beaufort,NC. With a 66’ mast you will need to sail back up offshore. Not too bad given the fact that the current and prevailing winds should favor that trip.

Bill

On Tue, Jan 15, 2019 at 12:40 PM Marcus via Groups.Io <pondering_50=[email protected]> wrote:
Hello,?? Been heading South and now It appears I have seals leaking on my sd50 saildrive.? Needing a place to be hauled out somewhere around Myrtle Beach SC. so I can get new seals installed. ? L400 with beam = 23ft.8"

Any suggestions appreciated.

L400 Haul Out near Myrtle Beach SC

 

Hello,?? Been heading South and now It appears I have seals leaking on my sd50 saildrive.? Needing a place to be hauled out somewhere around Myrtle Beach SC. so I can get new seals installed. ? L400 with beam = 23ft.8"

Any suggestions appreciated.
Re: Solar panel specs on L450 2015?

 

Thanks for all the input. Unfortunately right now I am a little distant from the boat. ?She is in Florida and I am Downunder in NZ. ?WIll check when I am back nearer. ?Regards. Michael
Re: Solar panel specs on L450 2015?

PaulinOz
 

The correct answer for the standard units supplied by Lagoon is not enough, 2kW is good, 3kW is even better. It is not about the max output on a clear blue day with full sun, but still getting usable power on a very overcast day, My 2kW array of Sunpower regularly gave 30 to 40 amps in those conditions.

-- Paul Rogers . Lagoon 450F #233 2013 East Coast of Oz
Re: Solar panel specs on L450 2015?

 

Count the number of cells a typical 250w panel is 6x10 cells and ratio from there. Cells lose efficiency with time but not drastic ie half. Has your system got a MPPT (maximum power point tracking) system? Normally above one of the engines where the power cords off the panels come to before connecting to the house batteries?
Re: Solar panel specs on L450 2015?

 

Could be anything. Look on the back of one of the panels. Should be a sticker with all the info. Take a picture of it and post it.
Rick sv Mai Tai L37 TPI

On Jan 9, 2019 4:21 PM, Michael Levy <michael.levy.nz@...> wrote:
Happy New Year all. We have 4 solar panels that came standard with the cat. Does anyone by chnace know the output etc of these?...of course I appreciate that depending on the sun orientation and availability of the sun makes a real difference! All the best Michael HEI MATAU 450 2015

Solar panel specs on L450 2015?

 

Happy New Year all. We have 4 solar panels that came standard with the cat. Does anyone by chnace know the output etc of these?...of course I appreciate that depending on the sun orientation and availability of the sun makes a real difference! All the best Michael HEI MATAU 450 2015
Re: #lagoon400 hot water pressure #lagoon400

 

开云体育

Thanks for the assistance. Turns out that The hot water cylinder inlet pressure relief valve also has a pressure reducing or one way valve that had simply disintegrated.This was blocking the flow and in turn pressure on the boats hot water. All sorted now, back to great showers. !!

?

?

Regards

John Jarvis

?

?

?
Re: #lagoon400 hot water pressure #lagoon400

 

开云体育

John,

Is this condition at all faucets and devices?

On my 410 I have flex lines both on the intake and discharge of the HWH. I have seen these kink and restrict water flow. The Mixing valve shouldn’t have anything to do with the pressure since it’s basically a flow thru device, cooling the water down, not restricting the HW. Another possibility is (depending on how old your HWH is) would be sediment buildup at the bottom of the tank restricting the incoming cold water. Drain the tank and see how fast the water comes out from the bottom then once it’s low remove the fittings and drain into a small plate to see if there is any crap coming out.

?

Steve in Solomons MD

410 S2E

?

From: [email protected] <[email protected]> On Behalf Of John L400 Hull #73
Sent: Saturday, December 29, 2018 5:26 PM
To: [email protected]
Subject: [lagooncatowners] #lagoon400 hot water pressure

?

Hi all
we have had a slow deterioration (over 5months) in the hot water pressure and flow. It has gone from being almost the same pressure and flow ?as the cold water system to a trickle, maybe 10% of the cold water flow now. I?
have played with the mixing valve immediately outside the hot outlet which seems stiff but turns. This makes no difference.
Anyone have any ideas as to why the pressure and flow would deteriorate on the hot side only? Could the inlet or outlet be partially blocked? Any Ideas would be appreciated.

John
Soteria
Lagoon 400 Hull 73

#lagoon400 hot water pressure #lagoon400

 

Hi all
we have had a slow deterioration (over 5months) in the hot water pressure and flow. It has gone from being almost the same pressure and flow ?as the cold water system to a trickle, maybe 10% of the cold water flow now. I?
have played with the mixing valve immediately outside the hot outlet which seems stiff but turns. This makes no difference.
Anyone have any ideas as to why the pressure and flow would deteriorate on the hot side only? Could the inlet or outlet be partially blocked? Any Ideas would be appreciated.

John
Soteria
Lagoon 400 Hull 73
401 - 420 of 26366