开云体育

Yo need to collect the loops and stove away INSIDE the lazy pack -- Meir Riba 4 Mishael Street, Holon 5883815 Israel +972-54-4277870 meirriba@... eldadhadani@...

I stitch the end of the new line to the end of the old line with some whipping twine, then wrap a bit of electrical tape around to make it run smooth, then pull new line in with old line same as you

Hi Paul how did you get the new reefing lines through the boom? Do the lines in the boom simply run from front to back, or is there still a redirection in the boom (like the the Selden

We pull the lines in every time on our 2016 Lagoon 52, Summer Kai. It takes us about 3-4 minutes to get the main down as we have to bring the halyard down some and the pull the reefing lines. It’s

Paul, If he has the same problem that I do, which is after dropping the main, large loops of reefing line hang down aft of the bimini and swing about. My worry is not that it is bad for the sail or

As PaulinOz said! DO not haul in the reefing lines, just arrange them as neatky as feasible inside the lazy pack after mainsail is down. Otherwise, you will also have difficulties railing the mainsail

The only time I pull in the reefing lines is if I am putting a reef in. Just tuck the overhang at the back into the sail bag when zipping it up. Also swapped out 14mm 1st and 2nd reef line for 12mm

Has anyone out there resolved the reefing line dragissues when dropping your main. ?Is there a better method than just hauling them in as another slowly lowers the main. not doing this leaves a mess

Take the square chrome covers of the LED roof lights, I recently noticed some screws through the roof panels hidden by the light trim in my L450F circa 2013. I have not removed them but my guess would

The gas bottle storage enclosure on my L400 was a “drop in” that was secured from the top via screws. The screws were located under the rubber weather seal for the seat lid. If your L450 LPG

Hi, My 450 is now 5 years old and it has been a great boat. It is a 230V/50Hz ship and I have wired my own LPG safety system into the boat and have therefore not used SG1 power from the 'spare' switch

Clever; I like it! Are the plates the same size as deck plates? If so I’ve seen

I had some PM's asking for some additional information on this tool. ?I purchased a metal 8" cleat and milled down (you could grind it) the foot so it was 11/16" wide.

We mounted our 32" TV using a standard TV wall bracket, mounted to the fibreglass vertical uprights between the window's in the main salon. Very secure and no issues once we are under way.

I want to mount a 24" tv in my lagoon 380. ANy ideas for a secure and convenient mounting system and place

Go for it On Sat, Aug 4, 2018 at 19:19, Manny Kaiser<manny.kaiser@...> wrote: Hi, I searching for a boat that is participating in the ARC 2018 Rally.? I would like to offer myself as a crew

Hi, I searching for a boat that is participating in the ARC 2018 Rally.? I would like to offer myself as a crew member. Kindly reply to my private email: manny.kaiser@... Thanks Manny

Serge i would like to see the photos and setup. details of what items used and sizes would be great.? thanks in advance paul

Did it on our 2001 410 2 years ago. So Worth it every time I hit the button. Don't forget a power winch(cut down white dish tub works to cover everything inside). Dont forget main sail hulldown line.

Thank you to everyone for their input.? I apologize for not responding earlier.? I work in the sailing industry and it is our very busy time of the year. Thanks again, Vicky Lohman Ohana Kai, 2007