开云体育

Hi every one, I need advice on bat cars. ?My 380 S2 has, like most a “Z Spar” main mast and bat cars system with balls. I am having trouble with my head car getting stuck. The balls are in good

You can order Lagoon parts from MultiTech Marine in Fort Lauderdale. MultiTech is also dealers for Quick (water heaters & windlass) and Incidence Sails. And I believe MultiTech now has a location in

The factory put a screw on the inside on our's (hull #434) and the gelcoat cracks were there before we added the padeyes for the spinnaker.

I've ordered lots of Lagoon parts from Groupe-Beneteau in Marion, SC. Phone: 843-629-5320. Unfortunately, I heard they are closing by the end of the year so I don't know how we'll get parts in the

Looking for source for parts for Lagoon 42 2017 build hull 142 want order replacement spare parts on rigging and utility’s such as fresh water pumps. Sunny Skye L42 hull 142

Three screws hold factory installed spi block on the bow on my L 400. Noticed that my bow screw has some gelcoat cracks so thinking to reinforce by adding 3 more screws. Anyone has done that before,

Hi all, my anchor holder flew away during an anchorage at 45 Kts. I had an anchor holder mounted with rivets and not welded - unfortunately, see enclosed pic please. Do someone has this anchor holder

We are putting our L400 up for sale.? Current location NE Florida.?? She is a 2013 4 cabin - 3 head.? lots of updates completed.? Asking 270k before? I get a broker.? Want pictures and list of

Hi Jeff, I presently have a facnor unit. Do I have to replace the headstay if I switch to Pro-Furl? Thanks, Joe Sent: Tuesday, August 4, 2020 12:09 PM To: [email protected] Subject: Re:

Here is an update, somewhat delayed? due to lack of rain, and then Hurricane Isaias came through! I wrapped the seam of of the bimini support with electrical tape, and that did the trick. No more

Oops, the info was further down in my Email. 8O) Steve

Use Snads from Sail Rite. Part#103652. They have an adhesive backing and Sail Rite also sells an activator to strengthen the adhesive. On of 193 in their catalog. Or look on line. I wound not drill a

Yes. please practice before committing to making a hole.

The Profurl C-430 is their newer Coastal model and it's a little larger letting you use 1/2" wire size.? The NCi4216D only go up to 3/8 wire size so if that is not what you have then the LC42D is an

Thanks Kevin, I’ll practice on a piece of scrap first to see what happens. It sounds like the slower the better though to minimize heat. Steve in Solomons MD 410 S2E Sent: Monday, August

Yes, not easy. It digs in too fast and will either break the drill bit or the acryllic. I have tried running it backwards to heat it up then slowly forward to pull out the "softened" plastic with some

Has anyone had any experience drilling into the Saloon windows? I want to install shade screens on the outside. I know there is a special bit for drilling a hole (about 1/8”) but was wondering if

Hi Jeff, thx for responding. What is the difference between the one above and the pro-furl 430? Thx, Joe Sent: Monday, August 3, 2020 2:33 PM To: [email protected] Subject: Re:

The Profurl NCi4216D would fit your standing rigging and we have sold many for replacements on that size Cats.? $2600 plus shipping from Stuart Florida.The Harken, Furlex, Schaefer and Bamar systems

Hi all, I need a new furling drum, new or repaired aluminum extrusion. My furler is 15 years old. I'm thinking a new furler is my best bet. Which furler manufacturer and model would be the best bet