There is a L37 L42 TPI ?Facebook group. You could post this question there! There may be other owners with ideas. I think the suggestion to drill a hole at the end of the crack is your best bet till you can replace it. I will be posting about our experience removing a couple and our solution for ones we didn't remove there once I have a little time. We are on a major time crunch right now to get our L37 back in the water. Banning to sand all the 2 year old bottom paint off due to an adhesion issue. Ugh.?
Rick??s/v Mai Tai L37 TPI?
toggle quoted message
Show quoted text
On May 11, 2018, at 22:36, Rob
rob@... [lagooncatowners] <
lagooncatowners@...> wrote:
?
Temporary stop-gap.. drill a stress relief hole at the end of the crack then fill with silicone or similar. This should stop the crack from lengthening while you sort out your solution.
When rebedding, consider not using fasteners.?
There is an active group for Leopard cats and rebedding has been detailed there. Search yahoo groups and ask to min to be able to search the archives.?
?
We just pulled a couple of ours out and then rebedded them. We decided to not replace ours at this time as they are in okay shape. I believe Midland Plastics in New Berlin, WI has an oven big enough to bend them. A sheet of 1/2" tinted acrylic is a little less than $500. They have a fabrication dept that can produce it but I think they may need to have the old one to make the form.
Rick??s/v Mai Tai L37 TPI?
?
Does anyone know how to repair?or replace the?front salon windows?? We have a 3 inch crack developing from one of the screws. .
