开云体育

Jim,

?

There is no problem. With the amp off, it will use the Power of the FT5000.

?

With the Amp on, there is a bypass that you can turn off, but then if your doing that then just turn off the amp and your fine.

?

One note you may want to heed. In menu optioin 171 of the rig, set it to MAX Power 50w so you don’t damage the LA1K unknowingly. It does go into bypass if its over 55w but just to play it safe.

?

You can always manually adjust it up to 200w if you don’t want to use the amp.

?

This is how I use mine. Store it as 50W and If I want only 100 w out then I manually adjust the knobs on the rig.

?

73 and Enjoy the beautiful LA1K

?

Barry

VE6UM

?

From: [email protected] <[email protected]> On Behalf Of James Barber
Sent: November 6, 2022 10:40 AM
To: [email protected]
Subject: [la1k] LA-1K Max feed-through power?

?

Just bought a FTDX-5000MP, which I will not be using with the LA-1K. I do, however want to pass the 200 watts from the the Yaesu through the LA-1K on its way to the antennas. Any issues here?

Thanks,
Jim N7CXI