I replied, no I didn't. The RF detection worked well enough I left it alone. I run non-resonant antennas so I have to tune anyway, so I put the amp in standby, tune with 10-15W and then put the amp into oper and go. I also have an RFKit that uses TCI for CAT but it doesn't put the amp in standby to tune so the procedure I use is identical even with band switching run by CAT. I put the amp in standby, send a tune signal and then put it in operate.
If you want to put the amp into standby when you hit tune, you will need an external utility, something like Node Red that will first send a command to put the amp in standby and then activate the rig to send a tun. You would use the external utility to tun, not the rig directly as it will have to put the amp in standby via a command first before the rig is triggered.
On Tue, Mar 28, 2023 at 11:06?AM Sonny Jobe <
hgjobe@...> wrote:
Hey Chris,
I sent you an email using your QRZ address on this. I am running the same setup and wanted to know if you got this working so that the LA-1K went to stand-by when you tuned using Thetis.
Sonny WC8L
